page-banner

Classification of copper valves

Copper valves are very common in factories and one of the indispensable materials. For valve purchases, more friends like to buy Taizhou copper valves, so which ones are commonly used in copper valves? Now I will introduce copper to you in detail. Classification of valves.

According to functions and uses, copper valves are mainly divided into the following categories:

1. Gate valves: Gate valve refers to a valve whose closing member (gate) moves along the vertical direction of the channel axis. It is mainly used for cutting off the medium in the pipeline, that is, fully open or fully closed.

2. Ball valve: evolved from the plug valve, its opening and closing part is a sphere, which uses the sphere to rotate 90° around the axis of the valve stem to achieve the purpose of opening and closing.

3. Shut-off valve: refers to the valve whose closing part (disc) moves along the center line of the valve seat. According to this movement form of the valve disc, the change of the valve seat port is proportional to the valve disc stroke.

4. Check valves: a valve that automatically opens and closes the valve clack depending on the flow of the medium itself to prevent shut-off backflow.

At the same time, there will be more or less problems during use. The leakage of copper valves is not only as simple as affecting the normal use efficiency, but also the leakage of some dangerous media that regulate and control strong acids and alkalis will cause unnecessary leakage. Security incidents, let’s take a closer look today.

 In fact, we know that the product is an important part of the pipeline. Before installation and use, it is necessary to design the pipeline according to the installation and use instructions of different valve types. When installing and welding on the pipe, make sure that the valve is fully open. Sometimes the temperature of the pipeline that needs to be installed is relatively high. In this case, it is not possible to install and use the Yuhuan valve, because the overheated pipeline will burn the sealing surface of the valve.

   And when we use the product, we also need it to be placed in a suitable environment, which can extend the life of the product.


Post time: Aug-20-2021